The Munchkin's Notebook

On January 11 th , I attended the first D.C. Cosplay Photo Shoots ’ meet up of the year.  This meet-up was held at Green House Studios in Fort Washington, Maryland.  The studio was ok, but what really put a damper on the whole experience for me was the studio reeked of a very specific plant, if you know what I mean.   For this session I used: Canon R6 2 Speed light Trigger 1 Light stands Umbrella 24 - 105mm lens Gels Camera Settings: Since this was in the studio, my camera setting did not vary too much.  I shot at ISO 200, and my aperture was evenly distributed between F4, F5.6, and F6.3. My shutter speed varied between 1/200s and 1/250s.  While my focal length varied from 24mm to 40mm, with the most common being 24mm.   The Photos: Let’s start with this image of Susannahvi24 as Kratos from God of War.  This is an interesting background to use for the character as it has nothing to do with the ancient Greek setting of G...

On January 9 th , Washu Cosplay and I did a slightly impromptu snow session at Great Falls National Park.   This was possible because of the passing of the Explorers Act which allows photography in a National Park with a model without a permit.   Before you get too excited, the law limits equipment and the size of the party; you are allowed your camera, tripod, and handheld lighting equipment, and the group can be no more than 5 people, which includes the photographer, model, and assistants.   So, there are no big lighting setups or big crews; for big shots, you will still need a permit.      For this session, I used: Photography Equipment Props/Miscellaneous Cannon R6 24-105 mm Lens Transmitter/Trigger 1 speed light 1 light stand     The set up For this shoot I was mixing flash and natural light.  In most cases, my model was partially backlighted by the sun.  Thus, I u...

My first official shoot of 2025 was with Lady Cels on January 4 th , to shoot her Queen of Hearts cosplay based off the NoFlutter Design. For this session, I used: Photography Equipment Props/Miscellaneous Cannon R6 24-105 mm Lens Transmitter/Trigger 2 Phottix Strobe 1 FJ400 Westcott Strobes 60-inch umbrella with sock 1 rectangular soft box 1 bell reflector grids 2 C-stands 1 Platypod Sandbags Backdrop stand Savage Primary Red Spyder Color Checker Card A-clamps   Gold ring wedding altar pieces Playing cards Flowers Styrofoam block Scotch tape     The set up The inspiration for this shoot was obviously the Queen of Hearts, but I took my set design cues from the original NoFlutter drawing.  I wanted to create something similar to the swirls used in the background of the image, so I started looking at wrought iron garden fences and ended up on gold we...

This year felt a little off for me; I think it was because I was in a mental recovery mode.  I finished my graduate program in June and immediately went on a week-long vacation to Palm Springs.  I do not recommend Palm Springs in June; way too hot.  I didn’t realize it at the time, but the graduate program mentally and physically exhausted me, which I think showed in some of my creative work.  But being able to work with great people like Natalie Hanrion , Coralinx Cosplay , and Anastasia B kept me motivated.  While I didn’t attend as many Cosplay Photo Shoot events as in the past, the ones I did attend were helpful in keeping the creativity flowing.  I also took some time this year to reflect on a few things and will be making some changes for 2025. In 2024, I shot 6241 frames, which is a 30-percent decrease from last year.  I edited 3187 frames, which is a 40-percent decrease from 2023.  I think this year, I started focusing on being very min...

The weekend of November 16 th , I got a little ambitious and did four sessions to test out the Lindsey Adler Optical Spot .     I originally rented the optical spot from LensRentals , but that session had to be rescheduled; however, I didn’t want the rental to go to waste, thus a TFP weekend. For this session, I used: Photography Equipment Props/Miscellaneous Cannon R6 24-105 mm Lens Transmitter/Trigger 2 Phottix Strobe 2 FJ400 Westcott Strobes 1 Optical Spot 2 strip boxes 1 bell reflector grids 2 C-stands 2 light stands Sandbags Backdrop stand Savage Fashion Grey Seamless Gobos Gels Spyder Color Checker Card A-clamps Star filter Red Curtains Posing stool     The set up While I did four shoots in one weekend, the lighting setup was basically the same for all four sessions; what changed was the gels and the gobos.  I started with a fashion grey seam...

On October 19 th I drove down to Richmond, VA to attend a Central VA Cosplay Photoshoot meetup on October 20 th at Belle Island.   I wanted to go to this event because it was in an interesting location, and I wanted to meet some new cosplayers.   For this session I used: Canon R6 2 Speed light Trigger 1 Light stands 24 - 105mm lens Gels Camera Settings: For this shoot, I was transitioning back and forth between being inside an old, dark, abandoned building to bright, sunny woods.  Due to the transitions, my settings varied greatly.  I mostly shot at ISO 100 except for when I accidently bumped the nob to “Auto” and didn’t notice, so I also took shots at ISO 2500, 3200, 4000, and 6400.  The shots at the high ISO actually look fairly decent, and not as grainy as one would expect.  My shutter varied between 1/100s to 1/250s with the most common shutter speed being 1/250s.  My aperture varied between F5 to F11 with the most common ap...

  On October 12th, I did a fall themed session with EJ.   For this session, I used: Photography Equipment Props/Miscellaneous Cannon R6 24-105 mm Lens Transmitter/Trigger 2 Phottix Strobe 1 Westcott FJ400 1 rectangular softbox 1 60-inch umbrella with sock 1 strip box 2 C-stands 1 light stand Sandbags Canvas backdrop Backdrop stand Spyder Color Checker Card A-clamps Orange gel 2 posing cubes Pumpkins Chair Fall leaves Crate   The set up For this setup, I started by placing the two posing cubes in the center of the backdrop and then surrounding them with pumpkins and leaves.  I then placed the strip box next to the backdrop stand on my right, which was going to add some light to the backdrop and some rim lighting to the model.  I then placed my main light diagonal to my rim light on my left-hand side.  Finally, I placed the umbrella with a sock slight...